Kesternich Optional Accessories

Additional Chamber Fittings
Automation Accessories
Data Measurement & Recording
External Service Utilities
Optional Testing Facilities
Service & Spares

Optional Accessory	Ref.	Description
CR4 Grade Steel Corrosion Test Panels for ISO 9227 & VDA 233-102	ACC131	Ascott CR4 Test Panels are used to check the reproducibility and repeatability of the test results for Salt Spray or Cyclic Corrosion Test Chambers being being used to run ISO 9227 or VDA 233-102 Click here to purchase CR4 Test Panels from Ascott online.
Air Compressor (large)	ACC04/2	A large free standing compressor, to provide a continuous supply of clean, dry and oil free compressed air, to enable the chamber to function without requiring connection to a local compressed air supply. Electrical supply: 220-240VAC single phase, 50Hz Output : 300 l/min displaced Free Air Delivery (FAD) @ 6 Bar : 179 l/min Max pressure: 8 Bar Air receiver: 59 litres Noise output: 74dB (A) measured at a distance of 1m
Guardian Angel System - Standard LED Version	ACC05/1	Modular traffic light alarm system fitted to the top of chambers, to provide visual notification of chamber status. Only available for Premium chambers (iP designations)
Guardian Angel System - LED Version, with USB Connectivity	ACC05/2	Modular traffic light alarm system fitted to the top of chambers, to provide visual notification of chamber status, with USB connectivity for remote monitoring. Only available for Premium chambers (iP designations)
Guardian Angel System - LED Version, with Ethernet Connectivity	ACC05/3	Modular traffic light alarm system fitted to the top of chambers, to provide visual notification of chamber status, with Ethernet connectivity for remote monitoring. Only available for Premium chambers (iP designations)
Guardian Angel System - USB add on only	ACC05/4	Retrofit add on for Guardian Angel, allows addition of USB connectivity for remote monitoring. Only available for Premium chambers (iP designations)
Guardian Angel System - Ethernet add on only	ACC05/5	Retrofit add on for Guardian Angel, allows addition of Ethernet connectivity for remote monitoring. Only available for Premium chambers (iP designations)
Water Deioniser System (Small)	ACC06/1	To provide water of suitable purity for topping up a salt spray/cyclic corrosion chamber air saturator, and for making up salt solution to be sprayed. Requires connection to a continuous mains water supply of maximum pressure 5.0 bar. This system comprises of a regenerable cylinder deioniser and an electronic conductivity indicator. Must be regenerated or replaced when exhausted.
Water Deioniser System (Medium)	ACC06/2	To provide water of suitable purity for topping up a salt spray/cyclic corrosion chamber air saturator, and for making up salt solution to be sprayed. Requires connection to a continuous mains water supply of maximum pressure 5.0 bar. This system comprises of a regenerable cylinder deioniser and an electronic conductivity indicator. Must be regenerated or replaced when exhausted.
Water Deioniser System (Large)	ACC06/3	To provide water of suitable purity for topping up a salt spray/cyclic corrosion chamber air saturator, and for making up salt solution to be sprayed. Requires connection to a continuous mains water supply of maximum pressure 5.0 bar. This system comprises of a regenerable cylinder deioniser and an electronic conductivity indicator. Must be regenerated or replaced when exhausted.
SIM Card Connectivity	ACC114	Equips the chamber with a SIM card reader, integrated into the chamber control system but accessible to the chamber user. The chamber user then procures a SIM card from a local mobile phone service provider (of the same type as used in mobile phones) and inserts this into the SIM card reader themselves. The user can then program the chamber, via the front panel controller, to use the SIM card reader to send preset text messages to phone numbers of the users choice, should predetermined conditions arise in the chamber. For example, the user could program the chamber to send him/her a text message alerting them if a predetermined alarm condition has been triggered. In addition, a remote user can use their own mobile phone to send predetermined text messages to the chamber, to get it to carry out a range of limited functions, such as silencing an active alarm. Note: excludes SIM card which user must procure and fit locally. Only available for Premium chambers (iP designations).
12 Month Consumables Kit for Cyclic Chambers	ACC57/2	A kit of consumables sufficient for operating an Ascott Atmosfär, Kesternich, Cyclic or Salt Spray Premium chamber for up to 1 year. Includes Salt Filters for Atomiser, Silicone tubing, Humidity Prove Filter Cap with O Ring & Air Filter Note: A consumables spares kit is supplied as standard with every new chamber.
Data Logging Software	ACC121	This software allows logging of chamber variables and editing of chamber programs. It is uses a graphics based display which mimics and improves on the chamber interface. It can be loaded on Workstations or Laptops with Operating systems of Windows 10, Windows 8 Professional, Windows 7 Professional, Windows 2000 (SP4+), Windows XP Professional (SP3+). It also requires the following minimum hardware requirements – 1 GHz Processor minimum Processor, 256 MB RAM, video 1280 x 1024 (high colour 16 bit) and it is advised 2GB Hard Disk Space for data. The software communicates via an Ethernet network adaptor from chamber to PC / Laptop. The Workstation / Laptop also require a USB port to load the software and to accommodate the Dongle that is needed to run this software. Network must also be suitable as it will only work across a network on Class C subnet masks/ IP addresses – please liaise with your IT departments to confirm this or contact Ascott for further information. Only available for Premium chambers (iP designations).
Mesh Racking	ACC15	Mesh type racking with an aperture of 30mm for testing small component parts. Locates on either the upper or lower level supports provided as standard inside the chamber, and removable if required. This product is available in a variety of sizes to suit different capacity chambers.
Slotted Sample Racks	ACC16	Removable slotted type sample rack for testing panels/coupons. Each slot is 3mm/1/8” wide and angled at 15 degrees from vertical. Such racks are supplied as standard, unless otherwise specified. Wider slots and/or different angles are available on request. *Exact part number dependent on chamber size.
General Motors Test Plate Kit	ACC16/6	A kit of 10 specially designed Polycarbonate test plate holders and nylon fixings, as pictured, for mounting General Motors test plates in accordance with the requirements of GMW14872 – in an existing Ascott slotted sample rack, ref ACC16.
Rod Sample Racks	ACC17	Removable rod type sample rack for suspending small test samples hung beneath, or for supporting larger test samples placed on top of these racks. *Exact part number dependent on chamber size.
Spiked Sample Racks	ACC18	Removable spiked type sample rack for suspending test samples from the 10mm/0.4″ diameter x 55mm/2″ long spikes, equally spaced, and protruding from opposite sides. *Exact part number dependent on chamber size.
Reinforced False Floor	ACC19	Removable reinforced false floor, providing a horizontal platform over the chamber base for supporting large/heavy test samples. *Exact part number dependent on chamber size.
Re-transmission of Temperature & Humidity	ACC36	Re-transmission of chamber temp & humidity as 2 x 0-10VDC signals via externally mounted socket. For remote data logging. Only available for Premium chambers (iP designations).
Temperature data logger	ACC50	A battery powered, chamber mounted data logger and temperature sensor. Continuously records the chamber air temperature (°C). Logs can be downloaded to a computer running appropriate software (provided).
Sikkens® Scratch Tool	ACC49	This scratching tool is specially designed to perform scribes on coated steel panels or test substrates prior to salt spray testing for example as described in ISO 9227 & ISO 12944-6 As standard, the scratch tool is supplied with 3 tungsten carbide cutting blades; 1 blade @ 0.5mm thick, the Daimler Chrysler version 1 blade @ 1mm thick, the original Sikkens^®version 1 blade @ 2mm thick, requirement for 2018 update of ISO 12944-6 The blade is positioned by an adjustable guide block to assist cutting a straight line. The guide block can be easily adjusted using the Allen keys provided. The tool features a soft grip ergonomically designed handle for ease of use and is supplied in a carry case.
Two Button Canopy Control	ACC07	Two button canopy operation ensures that the user must stand to the side of the chamber and use both hands in order to operate the pneumatically actuated canopy
Kesternich Portable So2 Detector.	ACC127	So2 Portable Detector (0-20ppm) Non-rechargeable Ideal for protection of personnel working with the chamber to detect any potential leaks in the chamber or on connecting exhaust systems. Compact and lightweight – Ultra small size and low weight makes the Detector comfortable to wear during a full shift in a pocket or on a belt or alternatively it can be kept with the chamber as a permanent safety feature. Striking and powerful alarms – Intense flashing red/blue combined visual alarm LEDs with 95dBA sounder and interval vibrating alarm provide the wearer with effective warning of potential gas hazards. Two instantaneous levels of alarm are available. Rugged casing – Robust polycarbonate case with full elastomeric over moulding for impact resistance and durability even in the harshest industrial environments Easy and safe to use – Simple single button operation and large, clear, easy to read display indicating the gas concentration and operational status Advance warning of calibration due – The detector provides a start up warning of expiry of valid calibration starting 30 days in advance. Non-rechargeable Battery – Each detector is supplied with a non-rechargeable Lithium battery giving upto 2 years operation. IP65 and IP67 ingress protection
Kesternich Portable So2 Detector.	ACC132	So2 Portable Detector (0-20ppm) Rechargeable – Ideal for protection of personnel working with the chamber to detect any potential leaks in the chamber or on connecting exhaust systems. Compact and lightweight – Ultra small size and low weight makes the Detector comfortable to wear during a full shift in a pocket or on a belt or alternatively it can be kept with the chamber as a permanent safety feature. Striking and powerful alarms – Intense flashing red/blue combined visual alarm LEDs with 95dBA sounder and interval vibrating alarm provide the wearer with effective warning of potential gas hazards. Two instantaneous levels of alarm are available. Rugged casing – Robust polycarbonate case with full elastomeric over moulding for impact resistance and durability even in the harshest industrial environments Easy and safe to use -Simple single button operation and large, clear, easy to read display indicating the gas concentration and operational status Advance warning of calibration due – The detector provides a start up warning of expiry of valid calibration starting 30 days in advance. Rechargeable battery with a 3000 Alarm Minute capacity. IP65 and IP67 ingress protection
Kesternich Chamber Wall Mounted So2 Detector	ACC128	Kesternich Chamber Wall Mounted So2 Detector – Mains supply When working with So2 then safety is obviously paramount for all users of such equipment. We can offer a wall mounted detector that is powered by mains. The unit is to be fitted on or near to the chamber to help detect leaks proactively with the chamber or gas bottles. Please check before purchase to ensure supply with your country is compatible.
Test Plate to hold small items/fasteners	ACC43	A polycarbonate test plate holder pre-drilled with 7 holes (3 x 6mm, 2 x 5mm, 2 x 4mm) which are fitted with the nuts and bolts: 3 of them with fitted with an M6 x 25 nylon nut and bolt 2 of them with fitted with an M5 x 20 nylon nut and bolt 2 of them with fitted with an M4 x 25 nylon nut and bolt When loaded with samples the plate slots into the standard slotted sample racks (Ref ACC16) The plate can be used in different ways, if the nuts and bolts are removed the holes can be used to suspend samples directly (as long as the samples do not fall through the hole), or small samples with a through hole (nuts, washers etc.) can be suspended on the bolts.