Corrosion Testing Standards

The test standard summaries are for general guidance only. Though believed to be accurate at the time of writing, this may change over time. So this information should not be used as a substitute for referring to a complete test standard, at an appropriate revision level.

Note: the terms salt spray, salt mist and salt fog are all in wide spread use within corrosion test standards. In this context they can be considered to be equivalent and interchangeable terms.

RNES-G-00006

RNES-G-00006

这是一种雷诺加速实验室腐蚀测试方法,可用于确定汽车组件和部件的耐腐蚀性。 它本质上是循环的,即;测试样品会随时间推移而暴露在不断变化的气候中。

将试样放置在封闭的室内,并暴露于变化的气候中,该气候包括以下3部分的重复循环。 暴露于连续间接喷洒盐水溶液4.0小时,在+35°C的腔室温度下,以1.0至2.0ml / 80cm² /小时的速率落在样品上。 随后在+60°C下在20至30%RH的气候下进行2.0小时的空气干燥。 随后在+50°C下暴露于92-98%RH的湿润(受控湿度)气候下2.0小时。 重复周期的次数,因此测试持续时间是可变的。

测试周期每个部分之间的最大转换时间也指定如下:

从盐雾到空气干燥在30分钟内。

从空气干燥到润湿在30分钟内。

从润湿到盐喷涂在30分钟内。