Corrosion Testing Standards

The test standard summaries are for general guidance only. Though believed to be accurate at the time of writing, this may change over time. So this information should not be used as a substitute for referring to a complete test standard, at an appropriate revision level.

Note: the terms salt spray, salt mist and salt fog are all in wide spread use within corrosion test standards. In this context they can be considered to be equivalent and interchangeable terms.

MIL-STD-750 メソッド 1046

方法1046.3:塩スプレー(腐食)

このMIL規格は何度か改訂され、再発行され、各号はメインの標準番号の後に表示される新しい連続した接尾辞文字に指定されました。 各リビジョンでは、この特定のテストに固有のメソッド番号が変更されている可能性がありますが、メソッド自体は一般的に次のようになります。

試験片は密閉されたチャンバーに入れられ、塩水溶液の連続的な間接スプレーにさらされ、+35°C + 1.1°C、-1.7°Cのチャンバー温度で、少なくとも16時間の平均実行に基づいて0.5〜3.0 / 80cm² /時間の割合で試料に落下します。 この気候は一定の定常状態条件下で維持されます。 テスト期間は48時間または96時間です。

試験終了時には、40°Cで24時間の乾燥期間が必要であることに注意してください。

米国国防総省のMIL規格の詳細については、こちらをご覧ください。 www.nssn.org