Corrosion Testing Standards

The test standard summaries are for general guidance only. Though believed to be accurate at the time of writing, this may change over time. So this information should not be used as a substitute for referring to a complete test standard, at an appropriate revision level.

Note: the terms salt spray, salt mist and salt fog are all in wide spread use within corrosion test standards. In this context they can be considered to be equivalent and interchangeable terms.

DIN 50 017-KFW


将试样置于封闭的腔室中,并暴露于由以下两部分重复循环组成的气候变化中。 在加热的饱和空气和水蒸气混合物中暴露8小时,温度为+ 40C,相对湿度为100%RH。 随后暴露在室温(根据 DIN 50 014 为 +18 至 +28C)和相对湿度小于 100%RH 的条件下 16 小时。 重复周期的次数,因此测试持续时间是可变的。

有关 DIN 标准的更多信息,请访问;