Corrosion Testing Standards

The test standard summaries are for general guidance only. Though believed to be accurate at the time of writing, this may change over time. So this information should not be used as a substitute for referring to a complete test standard, at an appropriate revision level.

Note: the terms salt spray, salt mist and salt fog are all in wide spread use within corrosion test standards. In this context they can be considered to be equivalent and interchangeable terms.

ASTM G85 附录 A3

海水酸化试验,环状

可用于测试涂层或未涂层铝合金和其他金属的相对耐腐蚀性,当暴露于酸化合成海水喷雾的变化气候下,然后是高湿度时,无论是在高温下。

将试样放置在封闭的腔室中,并暴露于由以下2部分重复循环组成的气候变化中。 连续间接喷洒酸化(pH 2.8至3.0)合成海水溶液30分钟,该溶液以1.0至2.0ml / 80cm² /小时的速率落在样品上。 接下来是90分钟暴露在高于98%RH的高湿度气候下。 整个测试周期在+49°C的恒定腔室温度下进行(对于有机涂层试样,可降至+24至+35°C)。 重复周期的次数,因此测试持续时间是可变的。

此测试也称为 SWAAT 测试。

有关ASTM标准的更多信息,请访问;www.astm.com