Corrosion Testing Standards

The test standard summaries are for general guidance only. Though believed to be accurate at the time of writing, this may change over time. So this information should not be used as a substitute for referring to a complete test standard, at an appropriate revision level.

Note: the terms salt spray, salt mist and salt fog are all in wide spread use within corrosion test standards. In this context they can be considered to be equivalent and interchangeable terms.

AA-0129

盐雾腐蚀试验用于测试腐蚀防护系统的有效性

可用于测试金属材料的相对耐腐蚀性,有或没有临时或永久的腐蚀保护,当暴露于盐雾气候(中性盐雾或乙酸盐雾或铜加速乙酸盐雾)在高温下。

将试样置于封闭的腔室中,并暴露于连续间接喷洒CASS溶液(pH 3.1至3.3)盐浓度:50 + 5 g / l氯化铜(II)。 2H2O: (0.26+/- 0.02) 克/升. 在+35°C或+50°C的腔室温度下,以30至40ml/ 80cm² / 24小时的速度落在标本上。 这种气候在恒定的稳态条件下保持。 测试持续时间是可变的。 腔室不应填充到超过50%的容量。

在所有其他方面,该测试均基于ISO 9227。

有关ISO标准的更多信息,请访问; www.iso.org

注意:许多ISO测试标准已与其他欧洲标准相协调,这些标准现在以“EN”(欧洲规范)或“** EN”为前缀 – 其中**是代表欧洲国家/语言代码的字母,例如“BS EN”表示英语中协调的英国标准。