Ascott Analytical . . . News
Introducing our new innovative adjustable sample rack
Accommodates test panels over a range of thicknesses
and at the right angle.
Many Ascott customers test for corrosion resistance using test panels (also called coupons) which represent the material and surface coatings, used for the finished product. Not only are these test panels available in a variety of materials and finishes, but they are also available in a wide range of widths and heights, as well as different thicknesses.
Once a customer has chosen the most suitable test panel for their application, these panels then have to be accommodated within the corrosion test chamber using a slotted sample rack which enables the test panel to incline at the correct angle from vertical, in accordance with the requirements of the test standard they wish to test to.
There are, therefore, many variables to be taken into account when testing panels.
To simplify this, Ascott have recently introduced a new range of samples racks which are available as optional accessories across our chamber product range and which feature an ingenious way of adjusting the slot width (up to 6mm thick) and angle of inclination (0 to 20 degrees from vertical). This is a major advantage over fixed slot width/angle racks because these can not generally accommodate test panels over 3mm thick and below this thickness the panels tend to ‘lean’ at an angle greater than the angle at which the slots have been cut, which may mean them not being tested at the angle required by the test standard.
In addition, the construction of these racks is an open form (top to bottom) to allow the ready passage of air through them. This helps to ensure a uniform distribution of the atmosphere around the samples during testing.
Product Code: ACC16/VARIABLE/450/1000/2000L.